If you purchased a new router, then you need to access the 192.168.1.1 Login Admin panel to set up and configure your router. 192.168.1.1 is a local IP gateway that is used to change the settings of a router, such as a network SSID or password, update router firmware, and so on. A default login username and password are required to access the 192.168.1.1 Login admin page.
192.168.1.1 admin login allows the users to perform the router settings. An updated web browser and default login username and password are required. The default username to access 192.168.1.1 Login panel is admin, and the password is password. You can check the default login credentials on the backside of the router or refer to the user manual.
Following are step-by-step instructions to perform 192.168.1.1 Login Admin
First of all, connect your computer to the router’s network and launch an updated web browser.
Now, enter 192.168.1.1 or http://192.168.1.1 in the address bar of the web browser and press the enter key.
On the resulting web page, enter your default login username and password in the given slots and tap on the login button.
After accessing the admin panel, you can change the network SSID and password,
Go through the below-mentioned steps to perform the 192.168.1.1 Login setup:
First of all, connect your router to the modem through an ethernet cable and turn it on.
Now, connect your device to the router’s network.
After that, launch a web browser on your device and enter 192.168.1.1 Login in the URL bar of the internet browser.
Press the enter and move to the admin login page. Enter your login details and tap on the login button.
Then, you will be navigated to the setup wizards. Follow all the on-screen instructions to complete the 192.168.1.1 setup.
Finally, tap on the save button and apply all the changes you made.
Default Router Passwords List
By accessing the 192.168.1.1 Login admin panel, you can change SSID to differentiate your router’s network from other networks. Following are the steps to change the WiFi network name:
Connect your computer or laptop to the router’s network and open a web browser on your device.
Enter your login details and move to the setup page.
Tap on the “wireless settings” button and search for the SSID option.
Provide your new SSID name in the given slot and tap on the Save button. Make sure that you are creating a unique name.
Modify the WiFi network password
While modifying the network name, you can also change your WiFi network password. Following are the steps to change the password:
Login to the 192.168.1.1 admin page and provide your default login credentials.
After that, move to the setup page and select the “wireless settings” option.
Then, search for the password field.
Enter your desired password in the giver slot and tap on the save or apply button. Ensure that you are creating a strong password.
Sometimes, users encounter issues while accessing the 192.168.1.1 login page, such as 192.168.1.1 not working, can’t access the 192.168.1.1 admin page, 192168.1.1 not opening, etc.
Following are the possible reasons for 192.168.1.1 Login not working error:
Hardware connection issues.
Wrong username or password.
Invalid IP address.
The issue with the router.
After knowing the possible reasons for can’t access the 192.168.1.1 admin page, you can fix the issue easily. Following are some troubleshooting methods to resolve the 192.168.1.1 is not opening issue.
Ensure that all the ethernet or network cables are inserted properly. If you see a red light or blinking light on the router, then disconnect the ethernet cable and reconnect it after a few seconds. Try to connect the router to a different power socket.
If you enter the IP address in the search box, then you can’t access the 192.168.1.1 Login admin page. Ensure that you are typing the correct IP address in the URL bar of the web browser. Following are examples of invalid IP addresses:
Therefore, cross-check after entering the IP address to avoid a login error.
Make sure that you are entering the correct username and password to access the 192.168.1.1 admin login page. The default username for 192.168.1.1 login is admin, and the password is password. If you have changed the password, then enter the new password in the given slot.
Also, if you have changed the WiFi network password, then you need to update it on the router’s network.
Make sure that you are using the updated internet browser to access the 192.168.1.1 login page. If you use the old version of the web browser, then you may encounter the 192168.1.1 is not opening error.
Additionally, remove the browsing history, cache memory, or junk files before accessing the 192.168.1.1 login panel.
Recover Router User and Password
Find Router IP Address
Router IP Address List
Top Parental Control Routers
Computer Games and Experiments: STEM
The outdated or corrupted firmware version is the major reason for the 192.168.1.1 not working problem. To fix this issue, log in to the 192.168.1.1 login page and check for updates. If the updates are available, then download the file and reboot your router to apply the changes.
If still, you are facing issues while accessing the 192.168.1.1 Login page, even after following the above-mentioned troubleshooting methods, then you need to reset your router to factory default settings. Following are the steps to reset the WiFi home router to factory default settings:
First and foremost, plug your WiFi home router into the wall socket.
Turn on the router and locate the reset button on the router.
Press the reset button with a sharp needle or paperclip until you see a blinking light on the router.
After that, release the button and wait for a few seconds. The router will restore its factory default settings.
Now, connect your device to the router’s network and try to access the 192.168.1.1 Login page with default login credentials.